ELKA FACTORY SERVICE - MOTO PRODUCTS

FRONT ELKA SUSPENSION
FRONT ELKA SUSPENSION SERVICE WORK (36/46mm)	DESCRIPTION
STANDARD SERVICE	Oil change, nitrogen refill, seal head, wearband, shims, o-rings
FULL SERVICE & REVALVE	Oil change, nitrogen refill, seal head, wearband, piston, valving modifications, shims, o-rings
REAR ELKA SUSPENSION
SERVICE WORK (36/46mm)	DESCRIPTION
STANDARD SERVICE	Oil change, nitrogen refill, seal head, wearband, shims, o-rings
FULL SERVICE & REVALVE	Oil change, nitrogen refill, seal head, wearband, piston, valving modifications, shims, o-rings
SERVICE WORK (20mm)	DESCRIPTION
STANDARD SERVICE	Oil change, nitrogen refill, seal head, wearband, shims, o-rings
SPRINGS (46mm)	DESCRIPTION
Rear Hyperco spring	For all other applications
Rear Eibach spring	For all other applications

ELKA FACTORY SERVICE - MOTO PRODUCTS

3-WAY Sportsbike Shock Absorbers

Our 3-Way shock absorbers provide maximum performance and adjustability to meet the demanding needs of today’s racers and track day riders. Elka Suspension hand-builds shocks, ensuring that each unit is valved and sprung specifically for bike model, rider weight, linkage ratio and type of track. The 3-Way units feature high- and low-speed compression adjustability to provide squat and traction control during cornering and acceleration, keeping the contact patch of the tire on the track while allowing smooth absorption of bumps and obstacles. In short, it keeps you glued to the track. These are not an “off-the-shelf shock” – they are custom-built and sprung specifically for you to get the maximum performance for your specific personal use. No need to change the spring or have it revalved. Install it and ride. After all, that’s what it’s all about. FEATURES External Reservoir Custom Valving Rider-Specific Spring Setup SIZE BODY: 46mm body SHAFT: 16mm shaft

 

2-WAY Sportsbike Shock Absorbers

The 2-Way Series shock absorbers are built to the same exacting standards as the 3-Way Series, and feature a single compression adjustment, as well as rebound, overall length and spring preload adjustments common to both models. These are not an “off-the-shelf shock” – they are custom-built and sprung specifically for you to get the maximum performance for your specific personal use. No need to change the spring or have it revalved. Install it and ride. After all, that’s what it’s all about. FEATURES External Reservoir Custom Valving Rider-Specific Spring Setup SIZE BODY: 46mm body SHAFT: 16mm shaft

ELKA FACTORY SERVICE - ATV PRODUCTS

Factory Shock

Our 3-Way shock absorbers provide maximum performance and adjustability to meet the demanding needs of today’s racers and track day riders. Elka Suspension hand-builds shocks, ensuring that each unit is valved and sprung specifically for bike model, rider weight, linkage ratio and type of track. The 3-Way units feature high- and low-speed compression adjustability to provide squat and traction control during cornering and acceleration, keeping the contact patch of the tire on the track while allowing smooth absorption of bumps and obstacles. In short, it keeps you glued to the track. These are not an “off-the-shelf shock” – they are custom-built and sprung specifically for you to get the maximum performance for your specific personal use. No need to change the spring or have it revalved. Install it and ride. After all, that’s what it’s all about. FEATURES NEW & IMPROVED CALIBRATION of the Patented TRACK™ System NEW & IMPROVED VALVINGS, Now Better Tuned for Each Type of Racing NEW & IMPROVED SPRING SETUPS, that maximizes the shock's potential on each vehicle model External Reservoir Custom Valving Rider-Specific Spring Setup SIZE FRONT: 36mm body, 16mm shaft REAR: (single shock): 46mm body, 16mm shaft

 

Stage 4 ATV Shocks

The Stage 4 shocks are the obvious choice for riders seriously committed to the cutting edge who refuse to make any compromises. These riders and racers demand the highest performance and the most adjustability to suit their aggressive and fast style of riding. These shocks feature independent adjustability of the high- and low-speed compression which allows you to adjust your suspension to react differently to big hits, sharp edges and jumps as well as for cornering and accelerating. Racing conditions can vary dramatically from one track to another, and sometimes even within the same track. With the Stage 4, you can make your suspension react with optimal efficiency over an entire track without compromise. FEATURES External Reservoir Custom Valving Rider-Specific Spring Setup SIZE FRONT: 36mm body, 16mm shaft REAR: (single shock): 46mm body, 16mm shaft REAR: (independent, pair): 36mm body, 16mm shaft

 

Stage 3 ATV Shocks

The Stage 3 is the benchmark in high-performance shock absorbers for sports riders and racers. They are our best-selling products thanks to their reliability, wide range of applications and quality. For track or trail, racing or just plain fun, they provide compression and rebound adjustability with piggyback or remote reservoirs. If you’re thinking about upgrading from your stock suspension and are seeking more wheel travel, custom spring rate and smooth progression, look no further. Bolt on a set and go riding! These are custom-built for each rider according to weight, riding style type of terrain and provide simple adjustments to further adapt to varying conditions or terrain types. Available in long-travel and stock-length versions for most sports and racing ATVs, the Stage 3 works so well that you can concentrate on what’s in front of you and forget about what’s going on beneath you. FEATURES External Reservoir Custom Valving Rider-Specific Spring Setup SIZE FRONT: 36mm body, 16mm shaft REAR: (single shock): 46mm body, 16mm shaft REAR: (independent, pair): 36mm body, 16mm shaft

 

Stage 2 ATV Shocks

The Stage 2 shocks feature the same quality components and careful craftsmanship as our higher-end series. They are custom-built for the rider’s weight, riding style and preferred terrain, with custom spring set-up and valving. While they are not optimized for competitive use, they can greatly improve your ATV’s performance and handling. You get the same performance and benefits of our racing shocks, only with less adjustability. The Stage 2 builds upon our Stage 1 with the addition of an external reservoir for more oil volume and flow that provides better cooling for a more consistant damping throughout the ride. We highly recommend the Stage 2 as our entry-level model for spirited riding, aggressive riders and for heavier vehicles. FEATURES External Reservoir Custom Valving Rider-Specific Spring Setup SIZE FRONT: 36mm body, 16mm shaft REAR: (independent, pair): 36mm body, 16mm shaft

 

Stage 1 ATV Shocks

The Stage 1 shocks feature the same quality components and careful craftsmanship as our higher-end series. They are custom-built for the rider’s weight, riding style and preferred terrain, with custom spring set-up and valving. While they are not optimized for competitive use, they can greatly improve your ATV’s performance and handling. You get the same performance and benefits of our racing shocks, only with less adjustability. For recreational riders on a more modest budget, the Stage 1 greatly enhances the overall handling and performance of your quad. These value-packed, easy-to-use shock absorbers are some of the best replacement shocks you can buy for your ATV. They will provide maximum comfort and performance in a carefree package. They might not have all the adjustments of higher-end shock absorbers, but they are perfectly suited to your personal needs, so you spend less time tuning and more time having fun riding. FEATURES 36mm body, 16mm shaft Custom Valving Rider-Specific Spring Setup